PC – DRIVERS (Package 2019_TH8RS_2) + Firmware

System Requirement: Windows® 10/ 8.1/ 8 / 7(32-bit / 64-bit) 

This driver package is compatible with these products:

- TSS HANDBRAKE Sparco® Mod
- TH8RS Shifter
- TH8A Shifter 



Changes made in new driver version 2019_TH8RS_2:

- Firmware update for TSS HANDBRAKE Sparco® Mod: v1.18
- Firmware update for TH8RS Shifter: v28



Important:

- DO NOT CONNECT the TH8 Shifter or the TSS HANDBRAKE Sparco® Mod to your PC before being prompted to do so.
- DO NOT CLICK in any Windows-specific panes that may appear during the update process.
- RESTART THE COMPUTER once the package setup is complete.



Installation: 

**NOTE**: If a driver package for your product is already installed on the computer, running the package installation once will actually uninstall the previous version. It will then be necessary to run it again to proceed to the installation of the new version.

1- Double-click the installation file (Package 2019_TH8RS_2.exe) to proceed with the installation.

2- Follow the instructions displayed onscreen. 

3- When done, select 

Start/All Apps/Thrustmaster TH8 Shifter-TSS Handbrake/Control Panel. (Windows 10/ 8.1 /8)

Start/All Programs/ Thrustmaster TH8 Shifter-TSS Handbrake/Control Panel. (Windows 7/ Vista)

The TH8 Shifter appears onscreen with the name T500 RS Gear Shift and with the status indication OK

The TSS Handbrake appears onscreen with the name TSS HANDBRAKE Sparco® Mod and with the status indication OK

4- In the Control Panel, click Properties to configure & test your device

You are now ready to race! 



Your device’s Firmware version appears in the top right in the Control Panel’s tabs:

- TSS HANDBRAKE Sparco® Mod: V1.18
- TH8A SHIFER: V28
- TH8RS SHIFER: V2