PC - DRIVERS [Package 2021_TH8RS_1] + Firmware

System Requirement: Windows® 10 / 11

This driver package is compatible with these products:

- TSS Handbrake Sparco® Mod
- TH8RS Shifter
- TH8A Shifter


Changes made in new driver version [2021_TH8RS_1]: added new firmware for the TH8A Shifter

* TH8A Shifter: new Firmware V29
	- Improved compatibility with the T150 racing wheel (when the shifter is connected to the wheel's DIN connector).
	!Important! Also requires to install new Firmware V35 on the T150 racing wheel



NOTE: Your device's Firmware version appears in the top right in the Control Panel's tabs:
- TSS Handbrake Sparco® Mod: V1.18
- TH8A Shifter V28
- TH8RS Shifter: V2


IMPORTANT:

- IF A DRIVER PACKAGE FOR YOUR PRODUCT IS ALREADY INSTALLED ON THE COMPUTER, RUNNING THE PACKAGE INSTALLATION ONCE WILL ACTUALLY UNINSTALL THE PREVIOUS VERSION. 
  IT WILL THEN BE NECESSARY TO RUN IT AGAIN TO PROCEED TO THE INSTALLATION OF THE NEW VERSION

- DO NOT CONNECT the TH8 Shifter or the TSS HANDBRAKE Sparco® Mod to your PC before being prompted to do so.
- DO NOT CLICK in any Windows-specific panes that may appear during the update process.
- RESTART THE COMPUTER once the package setup is complete.


INSTALLATION:
 
1- Double-click the installation file (Package 2021_TH8RS_1.exe) to proceed with the installation.
   If a driver package for your product is already installed on the computer, running the package installation once will actually uninstall the previous version
   = it will then be necessary to run it again to proceed to the installation of the new version

2- Follow the instructions displayed onscreen. 

3- When done, select: 
   Start/All Apps/Thrustmaster TH8 Shifter-TSS Handbrake/Control Panel. (Windows 10/ 8.1 /8)
   Start/All Programs/ Thrustmaster TH8 Shifter-TSS Handbrake/Control Panel. (Windows 7/ Vista)

The TH8 Shifter appears onscreen with the name T500 RS Gear Shift and with the status indication OK
The TSS Handbrake appears onscreen with the name TSS HANDBRAKE Sparco® Mod and with the status indication OK

4- In the Control Panel, click Properties to configure & test your device

You are now ready to race!